Loci, altitudes and signed area

Draw an obtuse triangle orthocentre in VectorPaint: extend altitudes beyond the outline

Use three original vertices to check the obtuse angle, three altitudes and external orthocentre, distinguishing sides from their lines.

English translation of the Chinese original, translated on . Original publication dates, attribution, code and version notes are retained.

Triangle centres need not lie inside the outline. Draw a fixed obtuse triangle and extend its three altitude lines to one external point, checking perpendicularity rather than connecting vertices to side midpoints.

Establish that the chosen triangle is obtuse

Use A=(0,0), B=(6,0), C=(2,1), joined in that order. At C, vectors (-2,-1) and (4,-1) have dot product -7, establishing an obtuse angle rather than relying on a flat appearance. The points are noncollinear, with base 6 and height 1. Reserve substantial space above for the orthocentre. On a roughly 1600 by 1400 canvas, screen origin (400,1100) and 90 pixels per unit keep equal scales. Grid-based placement may be approximate while the paper vertices remain fixed.

Associate each altitude with its opposite side

An altitude starts at a vertex and is perpendicular to the full line containing the opposite side. Its foot can lie beyond that side segment. The ledger lists three line equations: A’s altitude is not its median, and C’s vertical is not a decorative upward line. Distinguish solid triangle sides from lighter dashed extensions and name the intersection separately. Use available layers/groups to separate outline, construction and labels so selecting an altitude does not accidentally move a defining vertex.

A=(0,0); B=(6,0); C=(2,1)
CA=(-2,-1); CB=(4,-1); CA dot CB=-7
altitude(C): x=2
altitude(A): y=4*x
altitude(B): y=12-2*x
H=(2,8)
AH dot BC=(2,8) dot (4,-1)=0
BH dot AC=(-4,8) dot (2,1)=0
centroid=(8/3,1/3)

Draw C’s vertical altitude and its baseline foot

AB is horizontal, so C’s altitude has x=2. Its foot on AB is (2,0), distinct from C=(2,1), and the line also extends upward. Put a right-angle marker at the foot, not at every crossing. This line alone has infinitely many candidate points; the other altitudes must locate the orthocentre. Convert increasing mathematical height to decreasing screen y when placing the later point of height 8, instead of drawing it below the baseline.

Draw A’s altitude perpendicular to BC

BC has direction (4,-1) and slope -1/4. The perpendicular through A has slope 4, giving y=4x. Together with x=2, it meets at H=(2,8), well above C’s height 1. That external position is expected. Draw A’s altitude and extend BC beyond C toward its foot rather than bend the original side toward H. Crossing the triangle outline is not an error. If H is clipped, enlarge space or uniformly rescale the diagram instead of lowering only H to fit a frame.

Use B’s altitude as an independent third check

AC has direction (2,1), slope 1/2, so B’s altitude has slope -2 and equation y=12-2x. At x=2 it also gives y=8. Use this as an independent check instead of stopping after two lines intersect. Confirm its origin at B and perpendicularity to the line AC. Direction BH=(-4,8) dotted with AC=(2,1) is zero; AH=(2,8) dotted with BC=(4,-1) is also zero. These relations establish perpendicularity; a drawn right-angle icon by itself does not.

Separate orthocentre, medians and altitude feet

Here H=(2,8), while the median centroid is (8/3,1/3). Medians join opposite midpoints; altitudes require perpendicularity. Changing colour does not exchange these conditions. An altitude foot is also distinct from the orthocentre: C’s foot is (2,0), while H is the common intersection of altitude lines. A marginal control note is enough without crowding every centre onto the main image. Joining A to BC’s midpoint (4,1/2) reaches that side but is not perpendicular. Keep such a wrong-direction control separate, not as an alternative valid altitude.

Diagnose vertices, perpendicularity and extension scope

For nonconcurrence, first check unchanged vertices, then altitude/opposite-side pairing, then slope signs and axis scales. A foot beyond a side is valid and need not be dragged inside. Move crowded labels without changing H. Correct one altitude using the other two as controls. Canvas-centre alignment is not an altitude construction, and no unpublished triangle-centre tool is assumed. If export simplifies dashes, retain a clear distinction between original sides and extensions rather than let dense auxiliaries imply another polygon.

Reopen the external intersection and three zero-dot checks

Save the editable original and reopen an export, identifying obtuse C, sides, three altitude lines, C’s foot and external H. Include the line equations and perpendicular-direction checks; C’s vertical direction (0,1) also has zero dot product with base direction (6,0). Check the shared point and each originating vertex rather than mere accidental concurrence. Separate C/foot labels at small size while retaining height 1. This is an original obtuse-triangle construction with paper verification, not measured geometry or physical-device certification.

Triangle median centroid, Incircle and circumcircle.

Method sources: Ed Pegg Jr Orthocenter function and definition.

Checked on November 16, 2026: the official VectorPaint listing and Apple public lookup list public version 1.0.8, requiring iOS / iPadOS 17.0 or later. Work within published shapes, pen/node editing, layers, grouping, text and export capabilities. Prepare coordinates and calculations externally and identify installed controls; no built-in geometry solver or equation plotter is assumed. No completed physical-device test is claimed.